Angels Passion
Black Faux Leather Garter Harness with Detachable Chain Straps
Estimated Delivery Date: July 14-17
Buy at our retail store
Are you a dealer? Sign in to see prices
Discreet Shipping
Plain Packaging
No Content on Invoice
- SKU
- APFT705-S1
- Weight
- 0.200
- Categories
- Garter Harness
Product Details
| Care Instructions | Hand wash cool water, mild soap; air dry flat; wipe hardware dry promptly |
| Lining | No lining; single-layer faux leather throughout |
| Closure | Center-front buckle on waist bands; slide adjusters on thigh cuffs |
| Material | PU faux leather straps, animal-free synthetic construction |
Related Searches
Frequently Asked Questions
Yes, the 25cm silver chain is detachable via two small lobster clasps at each end, allowing you to wear it with or without the chain detail.
All straps are 2.5cm (1 inch) wide, made from consistent black faux leather with reinforced stitching along the edges.
Yes, the thigh straps adjust up to 70cm (27.5in), but due to the non-stretch material, it may feel snug on larger thighs. Measure carefully before ordering.
The material has a soft touch and is breathable thanks to the mesh lining, but prolonged wear beyond 3 hours may cause discomfort due to lack of stretch and pressure points.
Product Detail
Black faux leather garter harness with caged thigh bands and removable chain straps for bold layering.
- ✓Black faux leather with smooth finish
- ✓Adjustable waist 60–90cm (23.5–35.5in)
- ✓Detachable 25cm silver chain included
- ✓Three vertical thigh straps with D-ring hardware
- ✓Fits thighs 48–70cm (19–27.5in)
- ✓Strap width 2.5cm (1in), durable construction
- ✓Non-stretch material — not ideal for very wide hips
This black faux leather garter harness combines a double-band waist frame with structured caged thigh cuffs connected by vertical drop straps, creating a sculpted silhouette that works as a standalone statement or layered over a bodysuit. Four horizontal thigh cage straps per leg, two waist bands, and fully detachable chain straps give this piece a modular construction that most garter belts cannot match.
Caged Thigh Detail and Strap Layout
The waist section features two parallel horizontal bands secured by center-front buckles with silver-tone D-rings at each side. Vertical connector straps descend from the hip rings to the thigh cuffs, which each consist of four stacked horizontal straps framing an open-center cage. Silver O-rings and D-rings are distributed across both cuffs for the detachable chain attachments.
- Two waist bands with adjustable center-front buckle closure
- Four-strap caged thigh cuffs on each leg with silver O-ring accents
- Vertical connector straps with adjustable length via slide buckles
- Detachable chain straps clip to D-rings — worn or removed per outfit
- All hardware in silver-tone metal finish for a consistent look
How to Style and Occasion Pairing
Layer the harness over a fitted bodysuit for a festival-ready look that reads as fashion outerwear — the caged thigh bands are visible below shorts or a mini skirt and add structural contrast to soft fabrics. For editorial photography or a date-night look, wear it directly against the skin for a strappy lingerie aesthetic with the chains attached to amplify the body jewelry effect.
- Over a neon bodysuit and wide-leg trousers for a club-night look
- Directly over skin with the chains on for evening or intimate fashion shoots
- Paired with a sheer midi skirt where the thigh cuffs show through the fabric
- Under an open-front jacket as a layering piece at festivals
Sizing and Fit Range
The harness is sized from XS through 7XL, with each size covering a specific waist and thigh circumference range. The waist bands adjust by approximately 10 cm of slack via the center buckles; the thigh cuffs include slide adjusters that accommodate thigh circumferences roughly between 45 cm and 70 cm. The vertical connector straps add another 5 cm of adjustment for torso length differences. Note: the thigh cage design fits best on fuller thighs where the straps sit flat — very slender thighs may find the cuffs rotate slightly without additional tightening.
Material and Care
The straps are cut from faux leather (PU-coated synthetic backing), animal-free and consistent in texture across all widths. Hardware is silver-tone zinc alloy — lightweight and resistant to tarnishing under normal wear conditions. Hand wash in cool water with mild soap; do not machine wash or tumble dry. Lay flat to air dry and wipe hardware dry immediately to preserve the finish. The faux leather surface should be wiped with a damp cloth; conditioning creams are not necessary and may soften the stiff strap structure over time.
