Black Full Body Harness with Cage Chest Straps and Thigh Bands

This black faux leather full body harness covers chest, torso, and thighs in a single coordinated piece, connected by a detachable O-ring chain at the midriff that lets you reconfigure the silhouette in seconds. Unlike a simple chest harness, the design extends from a halter neck down to elasticated thigh bands, creating a layered strappy look across five distinct zones of the body.

Chest and Torso Cage Design

The upper section forms a caged chest harness with three horizontal strap rows across the torso, each anchored by silver-tone O-rings approximately 2.5 cm in diameter. A single vertical spine strap runs from neck to waist, splitting into the cage pattern at the bust line. The detachable midriff chain — made of silver-link metal — clips onto the O-rings with lobster-claw fasteners, so it can be worn or removed depending on the outfit.

• Halter neck loop anchors the full upper structure for secure fit
• Three horizontal torso bands spaced roughly 4 cm apart for defined layering
• Silver O-rings at every junction keep strap crossings flat and non-twisting
• Detachable chain section clips off in under 10 seconds — no tools needed

Thigh Garter and Lower Body Straps

Below the waist, two 2 cm wide elasticated thigh bands sit mid-thigh and connect back to the main body via short strap bridges with additional O-ring hardware. The included brief/thong base layer integrates directly into the harness frame, so everything stays positioned without constant adjustment. Note: the thigh bands are elasticated — they stretch to fit, but the strap bridges are fixed length, which limits the range to approximately 45-65 cm thigh circumference.

• Mid-thigh garter bands in 2 cm width, fully elasticated
• Integrated brief base keeps the full structure anchored during movement
• Strap bridges connect thigh bands to waist ring — not individually adjustable
• Suitable for thigh circumference approximately 45-65 cm

Sizing and Fit

The harness is available from XS through 7XL, with adjustable sliders on the shoulder, chest, and waist straps allowing a fit range of roughly 60-120 cm bust and 55-110 cm waist per size tier. The neck loop is also adjustable, accommodating neck-to-bust distances from approximately 20-32 cm. Buyers with a torso longer than 35 cm (navel to neck) may find the torso cage sections spread wider than shown in the image — this is a proportional fit consideration, not a flaw. For the fullest layered cage effect, a 65-90 cm bust measurement typically gives the closest match to the product image.

Material and Care

Body straps are constructed from 0.3 cm thick faux leather (PU) bonded to a thin polyester backing for shape retention. Hardware is zinc-alloy with a silver-chrome finish; the finish can show light scratching with heavy friction wear over time. The elasticated thigh bands are polyester-spandex blend. Hand wash in cool water with mild detergent, lay flat to dry — do not tumble dry or iron, as PU bonding degrades above 40 degrees Celsius. Wipe metal hardware dry immediately after washing to prevent tarnishing.

• Straps: PU faux leather over polyester backing, 0.3 cm thick
• Hardware: zinc-alloy with silver-chrome finish
• Thigh bands: polyester-spandex elasticated blend
• Care: hand wash cold, lay flat dry, no heat
• Chain: silver-link metal with lobster-claw clasps, removable