Angels Passion
Black Full Body Harness with Detachable Chain and Leg Garters
Estimated Delivery Date: July 15-20
Buy at our retail store
Are you a dealer? Sign in to see prices
Discreet Shipping
Plain Packaging
No Content on Invoice
- SKU
- APFT325-S1
- Barcode
- 9,75E+12
- Weight
- 0.200
- Categories
- Harness Set
Product Details
| Care Instructions | Wipe clean with dry cloth; avoid water immersion; hang to store |
| Lining | Unlined; bare PU on inner surface |
| Closure | Slide-bar buckles and lobster-claw O-ring chain clips |
| Material | Smooth matte PU faux leather, 1.5 cm wide flat bands |
Related Searches
Frequently Asked Questions
Yes, the 50cm silver O-ring chain detaches via a lobster clasp at the sternum, allowing you to wear just the harness or use it separately.
The main straps are 2.5cm wide, while the hip and shoulder bands measure 1.5cm for a balanced structure.
It supports up to DD cups, but the cross-over design may not fully accommodate E or higher cup sizes due to limited stretch in the chest band.
No, the PU-coated material resists cracking when folded, but storing it flat helps maintain its original shape over time.
Product Detail
Black faux leather full body harness with detachable O-ring chain and leg garters — one structured look, head to thigh.
- ✓Matte black faux leather, soft-touch finish
- ✓Detachable 50cm silver O-ring chain included
- ✓Adjustable straps fit chest 76–122cm and waist 60–130cm
- ✓Stainless steel hardware with lobster clasp closure
- ✓Cross-back design with reinforced stitching
- ✓Faux leather may have faint plastic smell initially
- ✓Chain weighs 80g — not ideal for extended wear
- ✓Includes 1 body harness + storage pouch
This black faux leather full body harness runs from a choker-style neck strap all the way down to double-band thigh garters, creating one continuous structured silhouette without layering separate pieces. The signature feature is a detachable O-ring chain at the chest center — clip it on for a evening editorial look, remove it for a cleaner strappy profile under a sheer top.
Strap Layout and Configuration
Seven distinct horizontal bands span the body: a neck collar with a front O-ring, two chest bands that frame an underbust panel, a waist cincher band, a hip-level band, and two thigh garter loops. All bands connect through silver-tone O-rings and slide-bar buckles positioned at intervals of roughly 8-10 cm, so you can shift each section independently rather than adjusting one master strap.
- Flat 1.5 cm wide faux leather bands throughout — thin enough to layer under mesh
- Silver-tone O-rings at neck, chest center, waist, and hip junctions
- Detachable chain attaches and removes via lobster-claw clips — no tools needed
- Seven adjustable sections for independent chest, waist, and thigh sizing
- Leg garter bands sit mid-thigh; not compatible with stockings below a UK 14 thigh
How to Style This Harness
Worn as a statement layer over a black bodysuit, the harness reads as structured outerwear at a festival or editorial shoot. For a evening aesthetic, pair the bare harness with high-waist briefs and the chain attached — the thigh garters anchor the look without additional accessories. The chest bands sit flat enough to wear under a deep-V blazer with the neck ring visible at the collar.
- Festival outfit: layered over a white cotton crop top with wide-leg trousers
- Evening shoot: worn alone with chain attached over dark briefs
- Night-out: under a sheer blouse, neck O-ring sitting at the collarbone
- Lingerie layering: over a smooth bodysuit to add dimension without bulk
Sizing and Fit
The harness fits bust circumferences from approximately 76 cm (30 in) to 107 cm (42 in) and hip circumferences from 84 cm to 114 cm, covering a typical XS through 3XL range. The thigh garter loops adjust from roughly 46 cm to 64 cm in circumference — they will not stretch to fit thighs above 64 cm comfortably. The waist band sits just below the natural waist; those with a torso longer than 50 cm from collar to hip should size up or the lower bands will feel tight.
Faux Leather Material and Care
Bands are cut from smooth PU faux leather with a matte-satin surface finish — no texture embossing, which keeps the look clean and photography-friendly. The material holds its shape after repeated wearing but will crease if folded tightly for storage; hang or roll loosely. Hardware is zinc-alloy with a chrome-plate finish — wipe clean with a dry cloth only; avoid prolonged water contact, which can discolor the chrome plating over time. The underside of the bands is unlined, so thin padding underneath is recommended for extended wear sessions lasting more than two hours.
