Faux Leather Waist and Thigh Harness with Bow Accents

This black faux leather waist and thigh harness connects a fitted waist band to two independent thigh cuffs via a central strap panel, creating a defined lower-body silhouette that works over shorts, trousers, or alone. Three silver O-rings anchor the strap junction at the waist and each thigh cuff, while small riveted bow accents at the thigh bands add a contrasting soft detail to the otherwise structured geometry.

Strap Layout and Hardware

The waist band sits at the natural waist and feeds two diagonal straps that converge at a central O-ring before splitting down to the upper thigh cuffs. Each thigh band closes independently, so fit can be dialed in on each leg separately. The silver-tone hardware includes three O-rings (approximately 3 cm diameter) and multiple flat rivets securing the bow tie accents.

• Three silver O-rings at waist centre and both thigh cuffs
• Diagonal centre-panel straps approximately 1.5 cm wide
• Flat waist band approximately 2.5 cm wide for comfortable hip contact
• Riveted bow accents at both thigh bands — decorative, not load-bearing
• Matte black faux leather body with subtle smooth texture throughout

Sizing and Fit

The waist band adjusts to fit waists from approximately 60 cm to 110 cm; thigh cuffs accommodate upper thighs from roughly 45 cm to 75 cm in circumference. The two-piece thigh design means different proportions between waist and thigh are manageable. This harness sits best on those with a natural waist-to-thigh drop — on very straight body proportions the diagonal straps may sit closer to vertical than diagonal. Size up if between sizes; the thigh cuffs have multiple buckle positions.

• Waist fit range: 60 cm to 110 cm
• Thigh fit range: 45 cm to 75 cm upper circumference
• Works over shorts, bikini bottoms, or directly on skin
• Best suited to waist-to-hip ratio of 0.7 or above for diagonal strap tension
• Not recommended for thigh measurements above 75 cm — thigh bands may feel tight

Material and Care

The straps and bands are matte black vegan faux leather — a PU-coated synthetic with a smooth, non-porous surface that resists light moisture and maintains its shape through regular wear. The hardware is silver-tone zinc alloy. Hand wash in cool water with mild soap; lay flat to dry away from direct heat, which can cause PU surfaces to crack over time. Do not machine wash or tumble dry.

• Body: PU-coated vegan faux leather, smooth matte finish
• Hardware: silver-tone zinc alloy O-rings and rivets
• Hand wash cold, mild detergent only
• Lay flat to dry — avoid direct sunlight or heat sources

Styling and Occasion

Worn over black bike shorts and a cropped top, this harness reads as festival-ready streetwear. Styled over a evening set it adds structure and focal point to an intimate fashion look without covering the garment beneath. The matte black faux leather pairs with chunky boots and wide-leg trousers for a fashion-forward layered outfit, or with a bodysuit for a body harness evening aesthetic. The bow accents prevent the look from reading purely utilitarian — they soften the O-ring hardware into something closer to strappy harness lingerie than workwear.