Angels Passion
Full Body Harness with Mesh Sleeves and Rings
Estimated Delivery Date: July 15-20
Buy at our retail store
Are you a dealer? Sign in to see prices
Discreet Shipping
Plain Packaging
No Content on Invoice
- SKU
- APFT1076-S1
- Weight
- 0.200
- Categories
- Chest Harness
Product Details
| Care Instructions | Wipe with damp cloth; do not submerge or machine wash; dry flat away from heat |
| Lining | None — open lattice construction, intended to layer over base garment |
| Closure | Pull-on lattice structure; O-ring rivets are fixed, not adjustable |
| Material | Faux leather (PU) strips with silver-tone zinc alloy O-ring hardware |
Related Searches
Frequently Asked Questions
The mesh sleeves are crafted from a fine, sheer polyester fabric offering moderate stretch, designed to fit arm circumferences between 25-40cm comfortably.
The primary O-rings used throughout the harness have an approximate external diameter of 2.5cm, with smaller rings measuring 1.5cm.
While designed for comfort and adjustability, the intricate strap and ring placement means it is best suited for moderate wear durations. The mesh sleeves provide breathability, but prolonged wear might cause minor pressure points depending on fit.
With proper care, the high-quality faux leather is designed for durability. Avoid excessive heat and harsh chemicals to prevent cracking or peeling.
Product Detail
Black faux leather lattice harness with full mesh sleeves and silver O-ring hardware throughout.
- ✓Sheer black mesh sleeves offer a delicate, breathable fit.
- ✓Adjustable faux leather straps with silver O-ring accents.
- ✓Intricate strap design creates a striking, web-like pattern.
- ✓Cropped silhouette for a contemporary, fashion-forward look.
- ✓Fits chest circumferences approximately 80-115cm.
- ✓Faux leather may have a faint initial scent.
- ✓Best suited for those seeking statement styling, not full coverage.
This black full body harness wraps the torso and arms in a geometric lattice of faux leather strips approximately 1 cm wide, connected at every intersection by a silver metal O-ring stud. The design extends into full-length mesh sleeves — a construction that sets it apart from standard chest-only or waist harnesses.
Lattice Structure and Silver Hardware
The harness body is built from interlocking diamond-shaped faux leather panels that cover the chest and torso. Each panel junction is secured with a riveted silver O-ring, creating a uniform grid that holds its shape without additional boning or structure. The same lattice continues down both arms to the wrists, where small open O-rings act as wrist cuffs. Because the frame is rigid at each ring point, the garment sits flat against the body rather than shifting during wear.
- Diamond-cell lattice covers full chest and torso in a single connected piece
- Full-length sleeves extend the harness grid from shoulder to wrist
- Silver O-ring rivets at every intersection — approximately 40+ hardware points visible
- Open O-ring cuffs at each wrist add a finishing structural detail
- Worn over a mesh base layer (not included) to maintain a sheer, layered evening aesthetic
Festival and Evening Styling
The long-sleeve lattice format works across multiple outfit contexts. For a festival look, layer this body harness over a black mesh bodysuit or sheer top with high-waisted trousers. For a evening or intimate fashion shoot, pair it over bare skin with black high-waist leggings as shown — the geometric grid frames the upper body while the sheer underlayer keeps the silhouette cohesive. The structured sleeves mean no separate arm harness is needed.
- Festival: over a black mesh bodysuit with cargo pants or mini skirt
- Evening: over sheer base layer with form-fitting leggings or shorts
- Party: layered under a sheer blouse with the sleeves visible at the cuff
Sizing and Fit Notes
The harness is sized by chest and torso circumference. The lattice panels have limited stretch — faux leather strips do not give the way elastic does — so accurate measurement is important. The design fits best on torso circumferences of approximately 70-100 cm; the sleeve length is fixed and suits arm lengths of roughly 55-65 cm. Buyers with very broad shoulders may find the lattice grid pulls across the back panel. Size up if between sizes for comfort.
Material and Care
The body of the harness is faux leather (PU) cut into narrow strips; hardware is silver-tone zinc alloy O-rings and rivets. The base mesh layer visible in the image is not part of this product. To care for the harness, wipe faux leather surfaces with a damp cloth and mild soap — do not submerge in water or machine wash. Dry flat away from direct heat to prevent the PU surface from cracking. The silver hardware should be dried promptly if wet to avoid tarnishing.
