Full Body Harness with O-Ring Choker and Waist Cage Straps

This is a full body harness in white reflective strapping built around three connected sections: an O-ring choker at the neck, crossed straps across the chest, and a waist cage that fans out from a center O-ring. The reflective finish is woven into the strap material itself, so it brightens under camera flash or headlights instead of relying on a printed coating that can crack or peel. As a reflective body harness, it sits over clothing rather than against bare skin, with small matte black rivets marking each strap junction where the pieces meet.

Choker and Waist Cage Design

The choker section closes at the front with a matte black O-ring, and two straps drop from it to meet the chest straps below, forming an open V that leaves the center of the chest bare. The waist cage is the most structured part of the harness: straps radiate out from a second center O-ring in a fan pattern before a single tail strap continues down past the hip. Rivets at each junction keep the strap angles fixed, so the fan shape holds its structure instead of collapsing when worn.

• Front choker collar with a matte black O-ring at center
• Crossed chest straps that meet in a V-point below the bust
• Waist cage with a star-pattern fan anchored by a second O-ring
• Single tail strap extending from the waist ring toward the hip
• Adjustable buckles at the choker, chest, and waist sections

How to Style It

Layer the harness over a black crop top and high-waisted leggings for a rave or club outfit where the reflective straps read as the focal point under stage lighting. For a going-out look, pair it with a fitted black bodysuit and combat boots so the white strapping contrasts against solid black underneath rather than blending into a busy print. A third option is a plain black tank and denim for a lower-key daytime pairing, where the harness reads more as a structured accessory than a full costume piece. In every combination the harness works best over solid, dark base layers since the reflective strapping is the visual focus and competes with patterned fabric underneath.

Sizing and Fit

This harness is cut and buckled across six labeled sizes, from XS/S up to 6XL/7XL, and each size adjusts within its own buckle range rather than across the full scale. XS/S and S/M fit slimmer chest and waist measurements, while 2XL/3XL through 6XL/7XL extend the strap length for fuller frames and a longer torso. Because the buckles only add a few centimeters of play within each label, someone between two sizes should size up rather than expect one label to cover both; the harness is not built to stretch a full size range on a single buckle setting.

• XS/S
• S/M
• L/XL
• 2XL/3XL
• 4XL/5XL
• 6XL/7XL

Material and Care

The straps are a reflective white vegan leather over a single-layer, unlined construction, with matte black metal hardware at the O-rings and buckles. The reflective effect is part of the strap surface, so it holds up under normal handling and repeated light exposure, but it will dull faster if the harness is machine washed, tumble dried, or ironed directly since heat and agitation break down the reflective layer faster than the base strapping. Spot cleaning keeps both the strap material and the reflective finish intact longer than a full wash cycle.

• Material: reflective white vegan leather strapping
• Hardware: matte black O-rings, rivets, and adjustable buckles
• Care: wipe clean with a damp cloth and air dry