Red Faux Leather Chest Harness with Molded Cups and Choker

This chest harness pairs molded faux leather bra-cup panels with a connected O-ring choker, creating a single structured piece that sits firmly across the chest without separate straps to adjust. The vivid red faux leather has a smooth, high-gloss finish, and all hardware — buckles, D-rings, and O-rings — is finished in gold-tone metal. Unlike flat-strap harnesses, the molded cup silhouette provides a defined bust shape over any base layer.

Red Harness Styling Options

Worn over a white fitted bodysuit or catsuit, the red chest harness reads as a bold fashion layer for a festival or themed party. For a evening look, pair it directly over bare skin with high-waisted briefs. The choker sits at the base of the throat, so crew-neck tops are not compatible — this piece is designed for low-cut, strapless, or halter necklines that let the choker float freely. A black blazer thrown over the shoulders keeps the harness visible at the front while adding coverage for bar or event entry.

• Festival and themed party outfit layered over a fitted catsuit
• Evening styling worn directly over bare skin with matching briefs
• Street-fashion look with a cropped leather jacket and high-waisted jeans

Cup Shape and Sizing

The molded cups are pre-shaped and non-padded, running approximately 30 cm across the full chest panel. Shoulder and side straps are adjustable via gold-tone buckles, accommodating bust measurements from roughly 75 cm to 115 cm. The choker band adjusts separately to fit neck circumferences of 32 cm to 42 cm. Because the cups are molded rather than underwired, they do not provide structured lift on their own — wearing a smooth bralette underneath improves cup fill for smaller bust sizes. Available from XS through 7XL.

• Chest panel width: approximately 30 cm across both cups
• Adjustable straps fit bust 75-115 cm
• Choker adjusts from 32 cm to 42 cm neck circumference
• Non-padded molded cups — best with a base layer for smaller sizes
• Size range XS to 7XL for plus-size inclusivity

Faux Leather Material and Care

The panels and choker are constructed from smooth-finish vegan faux leather bonded over a polyester backing. The interior contact surfaces have a thin fabric lining. Faux leather should not be machine washed — wipe clean with a slightly damp cloth and allow to air dry flat, away from direct heat or sunlight, which can cause the surface to crack over time. The gold-tone hardware is zinc alloy; avoid prolonged contact with water to prevent tarnishing. Store flat or loosely rolled, not folded at sharp angles, to preserve the molded cup shape.

• Outer: vegan faux leather with polyester backing, smooth high-gloss finish
• Lining: thin fabric layer on interior contact surfaces
• Hardware: gold-tone zinc alloy O-rings, D-rings, and buckles
• Care: wipe clean only — no machine washing, no tumble drying
• Store flat to maintain molded cup shape long-term

Choker Integration Detail

The integrated O-ring choker is the defining feature separating this piece from a standard harness bra. Thin shoulder straps run from the choker ring down to the top edge of the chest panel, creating a continuous visual line from neck to bust. The central front O-ring on the chest panel echoes the choker ring for a coordinated hardware story. This linked construction means adjusting the shoulder straps affects both the choker height and the cup position simultaneously — allow extra time during first fitting to dial in both at once.