Red Faux Leather Harness Set with Chain and Collar

This three-piece red faux leather harness set pairs a caged bra harness, a waist-and-hip belt harness, and a wide choker collar — all connected by a single silver-tone chain that runs from collar to waist. The vivid red straps are approximately 1.5 cm wide throughout, cut from smooth synthetic faux leather with a slight sheen, and finished with silver O-ring and D-ring hardware at every junction point.

Collar, Chain, and Bra Construction

The wide collar — roughly 4 cm tall — sits flat against the neck and clips shut with a silver front O-ring, from which the chain drapes down the torso. The chest section is a classic caged bra harness: two triangular cup frames formed by horizontal and diagonal straps meeting at a central front ring, leaving skin visible between each strap for a bold open-weave silhouette. All adjustments are made via silver roller buckles on each strap segment, so the chest fit is fully customisable rather than relying on a single rear closure.

• Wide 4 cm red faux leather collar with silver front O-ring attachment
• Silver-tone chain connecting collar to waist belt — approximately 40 cm drop length
• Caged bra harness with triangular cup frames and central front ring
• 1.5 cm strap width throughout for consistent visual line
• Silver roller-buckle adjusters on every strap segment

Waist and Hip Belt Detail

The lower piece wraps the waist and drops a secondary strap band around each hip, creating a garter-belt silhouette without covering the hip or thigh. A front D-ring on the waist band receives the chain from above, locking the three pieces into one coordinated look. This piece is worn over briefs or a thong — it is not a stand-alone bottom, so pair it with underwear of your choice. The chain also has a looped handle at the bottom end, adding a dramatic finishing detail visible from the front.

• Waist band with front D-ring for chain attachment
• Hip-drop strap creates garter-belt silhouette over any brief or thong
• Chain includes looped handle at lower terminus for styling effect
• Designed to layer over lingerie bottoms, not worn standalone

Sizing and Fit

The bra harness is built for a chest circumference of roughly 70-100 cm thanks to the multi-point buckle adjusters; the waist belt suits waist measurements of approximately 60-95 cm. The collar is adjustable to fit necks from about 30 cm to 42 cm. Because all pieces adjust independently, mixed-size bodies fit comfortably — the trade-off is that very full cup sizes above a D cup may find the triangular frames sit low on the bust rather than framing the centre. XS through XL body frames are the primary fit range for this three-piece configuration.

Material and Care

All straps are smooth faux leather (100% synthetic, animal-free); no lining is used on the strap backs, which means the material sits directly on skin — sensitive skin types may prefer wearing a thin bodysuit beneath. Hardware is silver-tone zinc alloy. Wipe straps clean with a damp cloth and mild soap; do not submerge in water or machine wash, as prolonged moisture weakens the synthetic bonding layer. Store flat or loosely rolled to prevent permanent crease marks on the faux leather surface.