Angels Passion
Red Faux Leather Waist Harness with Draping Thigh Chains
Estimated Delivery Date: July 14-17
Buy at our retail store
Are you a dealer? Sign in to see prices
Discreet Shipping
Plain Packaging
No Content on Invoice
- SKU
- APFT391-K2
- Weight
- 0.200
- Categories
- Womens Belt
Product Details
| Care Instructions | Wipe strap with damp cloth only; do not submerge; dry cloth for chains |
| Lining | No lining — single-layer faux leather strap |
| Closure | Adjustable buckle closure on waist strap |
| Material | PU faux leather strap with zinc-alloy O-rings and silver-plated iron-alloy chains |
Related Searches
Frequently Asked Questions
The waist strap of this harness can be adjusted to fit circumferences between 65cm and 110cm (25.5 to 43.3 inches) using the buckle closure.
The silver-toned thigh chains are designed to be detachable. They connect to rings on the waist strap with small lobster clasps, allowing you to remove them or reconfigure their placement for different looks.
The harness features silver-toned hardware made from a zinc alloy, including two prominent O-rings with a 3cm diameter at the front, along with chain links and lobster clasps for adjustment.
This waist harness is designed to be worn over clothing as a fashion accessory. Its adjustable nature, fitting waist sizes up to 110cm, allows for comfortable layering over dresses, bodysuits, or lingerie.
Product Detail
Red faux leather waist harness with cascading silver chains draping down to the thighs.
- ✓Vibrant red faux leather for a bold statement
- ✓Adjustable waist strap fits 65–110cm (25.5–43.3 inches)
- ✓Multiple silver-toned chains drape over thighs
- ✓Features two prominent 3cm O-rings at the front
- ✓Thigh chains are detachable for styling versatility
- ✓Faux leather may crease if folded tightly for storage
- ✓Zinc alloy hardware, approximately 150g total weight
This red faux leather waist harness pairs a slim 1.5 cm wide belt strap with dual silver O-rings at the center front and multiple layers of silver chains that drape from hip to thigh. Unlike a full body harness, it sits entirely at the waist, making it a fast-layer piece you can add over any outfit in under a minute.
Thigh Chain Layering
Four to five rows of fine silver-tone chains hang symmetrically from each O-ring, reaching approximately mid-thigh and swaying with every step. The chains are connected at two anchor points so they drape in coordinated curtains rather than tangling freely. This specific configuration suits festival and evening styling because the movement is controlled yet visually dramatic.
- Multi-row chain drape reaching approximately mid-thigh level
- Dual silver O-rings centered on the front waistband
- Chains anchor at two fixed points per side for tangle-resistant swing
- Silver-tone hardware contrasts the deep red strap for maximum visual pop
Styling and Occasions
Worn over a black matte bodysuit and high-waist shorts, the red waist harness adds a layered party look without additional garments. For a festival outfit, pair with cut-off denim and a crop top so the thigh chains drape over bare skin. The narrow red strap also works over sheer or mesh tops as a structured waist accent. Note: the chains hang best when worn with fitted bottoms rather than full-volume skirts, where they can get caught in fabric.
- Over a bodysuit and high-waist shorts for a party or club night
- Layered over a crop top and denim shorts at outdoor festivals
- As a evening fashion piece over lingerie for editorial-style photography
- Over a slip dress with boots for an edgy evening look
Sizing and Fit
The waist strap is adjustable from approximately 60 cm to 90 cm, covering waist sizes XS through XL comfortably. The chain length is fixed at approximately 35 cm from the O-ring attachment point, so the thigh drape lands differently depending on torso length. On a torso shorter than 45 cm hip-to-waist, chains will sit above mid-thigh; on longer torsos they reach mid-thigh. This piece is not recommended for waist measurements above 95 cm as the strap hardware has limited extension.
Material and Care
The strap is made from faux leather (PU synthetic) with a smooth matte-finish surface. Hardware is zinc-alloy with a silver-tone plating. Chains are lightweight iron-alloy, also silver-plated. To clean, wipe the faux leather strap with a damp cloth and mild soap only. Do not submerge in water. The chains can be wiped with a dry cloth to remove surface oils. Avoid prolonged contact with moisture to extend plating life. The faux leather is animal-free and vegan.
